Return to Misty Moorings De Havilland DHC2 Beaver ---------------------------------------------------------------------------------------------------------------------------------------------------- This is a repaint for the Milviz Beaver addon for FSX and P3D This repaint represents the fictitious De Havilland DHC2 Beaver payware Milviz Beaver De Havilland DHC2 of Blue Wave Energy Partners (BWEP) of Return to Misty Moorings (RTMM). ---------------------------------------------------------------------------------------------------------------------------------------------------- Installation: The following instructions will allow the installation of four versions of the Aerosoft BeaverX: 1) Wheels (Base Model) 2) Amphibian 3) Tundra Wheels 4) Skis The package contains three different cockpit layouts (grey, black, wood) as well. The Installation is described at the end of this document. ----------------------------------------------------------------------------------------------------------------------------------------------------- Important Note: The Milvz Beaver offers 2 aircraft models (cargo and passenger). These aircraft models must be configured via the milviz MVAMS app which will automatically installed with install of the Milviz Beaver product. After changing in the MVAMS and saving defaults, the app writes changes to the aircraft.cfg. These changes affect the model= entry there, with model= is the passenger aircraft model model=1 is the cargo aircraft model The following install instructions for the RTMM Beaver paintscheme are preconfigured for the passenger aircraft model. So, before installing the Beaver paintscheme make sure you have set to the Beaver to Passenger version in the Milviz MVAMS before. Otherwise you will get a faulty aircraft model displayed in the simulator. If you want to fly the passenger version then simply start the simulator. If you want the cargo version instead. Run the Milviz MVAMS app again, choose the cargo version and save as default. Then run the simulator. ----------------------------------------------------------------------------------------------------------------------------------------------------- Installation of version 1): - Unzip the downloaded zip-file. - Open Folder "DHC-2 Beaver Milviz" and copy content to your SimObjects\Airplanes\DHC-2 Beaver Milviz folder (usual path is something like "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DHC-2 Beaver Milviz" or your respective P3D folder) - In your "DHC-2 Beaver Milviz" folder open "aircraft.cfg" copy and paste the text below immediately after your last [fltsim.xx] text block (where xx is the last highest number) and then change the ".xx" to the nextest higher number (if the last fltsim block read [fltsim.10] change the .xx to read [fltsim.11] [fltsim.x] title=DHC2 Beaver N217MM RTMM WHEEL sim=MilvizDHC2_Base model=1 sound= panel= texture=N217MM atc_id=N217MM atc_airline= atc_flight_number=217 ui_manufacturer="De Havilland Canada" ui_type="Beaver DHC2" ui_variation=N217MM" ui_typerole="Single Engine Prop" ui_createdby="MilViz" description="This is a repaint of the payware Milviz Beaver De Havilland DHC2 representing the fictitious De Havilland DHC2 of Blue Wave Energy Partners (BWEP) by Return to Misty Moorings. see homepage under www.return.mistymoorings.com." ----------------------------------------------------------------------------------------------------------------------------------------------------- Installation of versions 2): - Unzip the downloaded zip-file. - Open Folder "DHC-2 Beaver Milviz Floats" and copy content to your SimObjects\Airplanes\DHC-2 Beaver Milviz Floats folder (usual path is something like "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DHC-2 Beaver Milviz Floats"or your respective P3D folder) - In your "DHC-2 Beaver Milviz Floats" folder open "aircraft.cfg" copy and paste the text below immediately after your last [fltsim.xx] text block (where xx is the last highest number) and then change the ".xx" to the nextest higher number (if the last fltsim block read [fltsim.10] change the .xx to read [fltsim.11] [fltsim.x] title=DHC2 Beaver N217MM RTMM Floats sim=MilvizDHC2_Floats model= sound= panel= texture=N217MM atc_id=N217MM atc_airline= atc_flight_number=217 ui_manufacturer="De Havilland Canada" ui_type="Beaver DHC2" ui_variation=N217MM" ui_typerole="Single Engine Prop" ui_createdby="MilViz" description="This is a repaint of the payware Milviz Beaver De Havilland DHC2 representing the fictitious De Havilland DHC2 of Blue Wave Energy Partners (BWEP) by Return to Misty Moorings. see homepage under www.return.mistymoorings.com." ----------------------------------------------------------------------------------------------------------------------------------------------------- Installation of versions 3): - Unzip the downloaded zip-file. - Open Folder "DHC-2 Beaver Milviz Tundra" and copy content to your SimObjects\Airplanes\DHC-2 Beaver Milviz Tundra folder (usual path is something like "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DHC-2 Beaver Milviz Tundra"or your respective P3D folder) - In your "DHC-2 Beaver Milviz Tundra" folder open "aircraft.cfg" copy and paste the text below immediately after your last [fltsim.xx] text block (where xx is the last highest number) and then change the ".xx" to the nextest higher number (if the last fltsim block read [fltsim.10] change the .xx to read [fltsim.11] [fltsim.x] title=DHC2 Beaver N217MM RTMM TUNDRA sim=MilvizDHC2_Tundra model=1 sound= panel= texture=N217MM atc_id=N217MM atc_airline= atc_flight_number=217 ui_manufacturer="De Havilland Canada" ui_type="Beaver DHC2" ui_variation=N217MM" ui_typerole="Single Engine Prop" ui_createdby="MilViz" description="This is a repaint of the payware Milviz Beaver De Havilland DHC2 representing the fictitious De Havilland DHC2 of Blue Wave Energy Partners (BWEP) by Return to Misty Moorings. see homepage under www.return.mistymoorings.com." ----------------------------------------------------------------------------------------------------------------------------------------------------- Installation of versions 4): - Unzip the downloaded zip-file. - Open Folder "DHC-2 Beaver Milviz Skis" and copy content to your SimObjects\Airplanes\DHC-2 Beaver Milviz Skis folder (usual path is something like "C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X\SimObjects\Airplanes\DHC-2 Beaver Milviz Skis"or your respective P3D folder) - In your "DHC-2 Beaver Milviz Skis" folder open "aircraft.cfg" copy and paste the text below immediately after your last [fltsim.xx] text block (where xx is the last highest number) and then change the ".xx" to the nextest higher number (if the last fltsim block read [fltsim.10] change the .xx to read [fltsim.11] [fltsim.x] title=DHC2 Beaver N217MM RTMM SKI sim=MilvizDHC2_Skis model=1 sound= panel= texture=N217MM atc_id=N217MM atc_airline= atc_flight_number=217 ui_manufacturer="De Havilland Canada" ui_type="Beaver DHC2" ui_variation=N217MM" ui_typerole="Single Engine Prop" ui_createdby="MilViz" description="This is a repaint of the payware Milviz Beaver De Havilland DHC2 representing the fictitious De Havilland DHC2 of Blue Wave Energy Partners (BWEP) by Return to Misty Moorings. see homepage under www.return.mistymoorings.com." ---------------------------------------------------------------------------------------------------------------------------------------------------- Installation of the RTMM custom cockpit layouts: There are three RTMM cockpit layouts avaible for install. 1) BWEP light blue cockpit panel 2) BWEP blue cockpit panel 3) BWEP wooden cockpit panel Note: the 1) BWEP light blue cockpit panel is included in the above RTMM paintschemes by default. So if you install these paintschemes you already install this grey RTMM cockpit panel with them. Installation of BWEP cockpit panel 1) - Open Folder "Cockpits" included in this zip-file. - Open Folder "panel light blue" and copy content to your SimObjects\Airplanes\DHC-2 Beaver Milviz or DHC-2 Beaver Milviz Floats or DHC-2 Beaver Milviz Tundra or DHC-2 Beaver Milviz Skis folder and overwrite existing files. Installation of BWEP cockpit panel 2) - Open Folder "Cockpits" included in this zip-file. - Open Folder "panel blue" and copy content to your SimObjects\Airplanes\DHC-2 Beaver Milviz or DHC-2 Beaver Milviz Floats or DHC-2 Beaver Milviz Tundra or DHC-2 Beaver Milviz Skis folder and overwrite existing files. Installation of BWEP cockpit panel 3) - Open Folder "Cockpits" included in this zip-file. - Open Folder "panel wood" and copy content to your SimObjects\Airplanes\DHC-2 Beaver Milviz or DHC-2 Beaver Milviz Floats or DHC-2 Beaver Milviz Tundra or DHC-2 Beaver Milviz Skis folder and overwrite existing files. For the case something went wrong with installation of the custom paints you can install the default milviz cockpit panels. - Open Folder "Cockpits" included in this zip-file. - Open Folder "default panel backup" and copy content to your SimObjects\Airplanes\DHC-2 Beaver Milviz or DHC-2 Beaver Milviz Floats or DHC-2 Beaver Milviz Tundra or DHC-2 Beaver Milviz Skis folder and overwrite existing files. Enjoy! ---------------------------------------------------------------------------------------------------------------------------------------------------- (c) by Klaus Tröppner www.return.mistymoorings.com